Queensize Camper Hot Water Shower Kit

Camper shower "hot water" stainless steel from Queensize Camper

Camper shower / shower set of the brand Queensize Camper  

You're looking for importance to high-quality equipment in your camper and want to avoid plastic components? This shower set made of stainless steel convinces both in terms of quality & design and underlines your demands for a professional finish.

Mixer and wall outlet bend in separate design

To allow for the greatest possible flexibility during expansion, the mixer fitting and wall outlet bend are designed separately for this camper shower. They can therefore be installed in different positions.

Shower head / shower with volume regulator

The Queensize Camper Shower helps you save water. For this purpose, the shower has a volume control so that you can, not only at the mixer, but also at the end of the hose / shower adjust the amount of water output. Of course, the water here can also be set completely on / off (volume control from 0-100%). With a little practice, this can also be done very well with one hand.

Perfect for additional outdoor shower

The shower hose can be easily disconnected from the wall outlet by means of a quick coupling and can thus be stowed, for example, for the trip in the supplied felt bag, so as not to rub the shower wall all the time. In the felt bag the hose and shower spray are rattle-proof in your camper! The quick-release coupling on the wall outlet closes automatically after disconnection (integrated water stop). On the hose side, the coupling is open so that the water can be easily drained from the hose.

Two jet types selectable

For different preferences, turn the aerator on the shower head between two different jet types.

Install camper shower Mixer

The mixer is mounted through a hole circle of at least 34 mm and secured against rotation from behind with a nut/ washer and flat gasket. On the inside of the rosette there is also an O-ring that seals against the shower wall.

The mixer is supplied by a hot or cold water flexible hose, each of which is 30cm long and has a 10mm hose nozzle directly at the end. The outlet for the mixed water is also connected to a flex hose with a 10mm hose nozzle. If you have to "bend" the hose by 90 degrees directly behind the mixer, you need at least 90mm so that the hose does not kink, measured from the shower wall front side.

90° Wall outlet

The 90° wall outlet is installed through a min. 21 mm hole circle (again with nut/ washer/flat seal and O-ring on the inside). A flexible hose is also screwed into the back of the wall outlet: the connection to the mixer is therefore made with a 10 mm hose, giving you maximum flexibility in the installation position or the distance between the mixer and outlet.

If you have to "bend" the hose by 90 degrees directly behind the outlet, you need at least 55 mm so that the hose does not kink, measured from the front of the shower wall. The quick coupling to the hose has a shut-off function, i.e. this closes automatically when the hose is pulled off. The hose has the matching counterpart and is 2 m Long.

Wall thicknesses:

• Mixer up to max. 25mm
• 90° Wall outlet up to max. 15mm

All connections to the mixer and wall outlet have the standard household thread M10x1.

The shower holder for the shower is also made of stainless steel and has a ball joint. It has two mounting holes and is mounted e.g. with wood screws (screws not included), can thus be positioned as desired.

Recommendation: Use the shower set with a pump with min. 1.5 bar.

Scope of delivery:

• Shower head
• Shower holder
• 2m Shower hose with quick coupling
• Wall outlet with quick coupling
• Mixer
• 4x Connection hose
• Felt bag